Description

Here we have a pre owned SWR Goliath Jr III 2×10″ 8ohm Bass Speaker Cabinet.   Made in the USA.   SWR is known for making some of the best bass gear on the planet.  The Goliath Jr III cabinet is an 8ohm cabinet. The cabinet handles 350 watts.  It is black carpet covered and in great shape.   The grill is chrome and the plastic protector sticker is still over the SWR logo.  Works well as a stand alone cabinet but also great when you pair it with another 8ohm cab.   Thanks for looking and happy buying!
From the web….

GOLIATH JUNIOR III SPECIFICATIONS Description: 2×10 + Tweeter Speaker Enclosure Power Handling: 350 watts RMS Impedance: 8 ohms or 4 ohms – depending upon which model puchased (8-ohm and 4-ohm models available) Frequency Response & SPL: 105 dB SPL @ 1W1M (–3 db @ 45 Hz and 12 kHz) Speaker Complement: (2) 10″ PAS Drivers, (1) Foster Horn Porting: Front Slot Port Dimensions: 23″W x 15.75″H x 16.5″D Weight: 55 lbs. 

P.A.S. 10″ SPEAKER SPECIFICATIONS Free Air Resonance: 47Hz Individual Impedance: 8 Ohms (each) Power Rating: 175 Watts RMS (each) CONNECTION AND 

OPERATION The SWR Goliath Junior III can be connected to any musical instrument amplifier capable of driving a 4 or 8 ohm load. To connect your amplifier to Goliath Junior III, run a high quality speaker cable (18 gauge or heavier) from your amplifier’s speaker output to one of the designated speaker inputs (Speakon or 1/4″) on Goliath Junior III’s input panel. 

POWER HANDLING The power output rating for any amplifier that is connected to Goliath Junior III should not exceed the enclosure’s 350 watt RMS power handling capacity. Please be aware that exceeding Goliath Junior III’s power handling capacity can void the SWR warranty if any damage occurs to your loudspeakers due to overpowering. 

FULL RANGE INPUT AND OUTPUT JACKS Goliath Junior III features four, full range input/output jacks (two standard 1/4″ and two Speakon) wired in parallel. If you are running two speaker enclosures in parallel, connect the speaker cable from your amplifier to either jack labeled “IN,” and a second speaker cable from either jack labeled “OUT” to the input of the second speaker enclosure. 

TWEETER ATTENUATOR CONTROL The large dial found on the input panel of the cabinet is the Tweeter Attenuator. This control is used to adjust the level of high frequency signal present at the tweeter. A normal setting for this control is straight up or “twelve o’clock.” Turning the dial fully counter-clockwise removes the tweeter from the circuit. As you turn the dial clockwise from this position, the high frequency content is increased. 

INTERNAL CROSSOVER Goliath Junior III’s internal (passive) crossover divides the incoming signal into two frequency bands. The crossover point is 5 kHz (frequencies above 5 kHz are sent to the tweeter, frequencies below 5 kHz are sent to the 10″ speakers). 8-ohm model 4-ohm model

                           We ship via Fedex ground, UPS, or USPS and insurance is always included in shipping.  Local pickup is available.

Sales tax will be collected for all New York residents. Due to new laws in effect, other states are now collecting tax as well. Please note that this is out of our hands. If your state collects sales tax, it will be added to the sale total.  

 Payments must be made within 48 hours of Sale/Auction’s end.

Feel free to send a message if you have any questions. We are a full service music store in Melville, Long Island, NY. Hours- Mon-Thursday 11am-8pm Friday + Saturday 11am-6pm

                                           GOOD LUCK AND HAPPY BUYING!!!