Description

****** Authorized Darkglass Dealer ******
Here we have a new Darkglass Luminal Booster Ultra Bass Pedal.   The Luminal Booster Ultra combines the Harmonic Booster with 6-band EQ and compression. Also loaded with Cab IR’s so it really becomes an all in one unit.  Very tweakable pedal.  Balanced DI output as always on most of the Darkglass line.  Add one to your rig today.  Thanks for looking and happy buying!

From Darkglass site…

Combining the rich tone of the Harmonic Booster with the precision of an adjustable frequency range parallel compression, this pedal gives you unmatched control. With a 6-band EQ, gain reduction meter, and the option to load 7 custom Impulse Responses via USB, it delivers ultimate tonal flexibility for bass players of any genre. Pure, powerful, and precise—your clean tone, perfected.

Filter

Adjustable lowpass filter for the compressed signal

Blend

Blends between clean and compressed signal

Comp

Adjusts the amount of compression applied

Level

Adjusts the level of the compressor after the blend control

Boost

+-20dB boost or cut

Character

Allows blending in the perfect amount of the tone-shaping circuitry. Press to select between 7 IRs.

Mid gain

+-20dB @ the frequency selected by “Mid Frequency”.

Mid Frequency

Mid frequency from 250Hz to 2.5kHz.

Master

+-12 dB. Sets the overall volume of the unit.

Bass

Low shelf +-13dB @ 80 Hz

Mid bands

+-13dB @ 250 Hz, 500 Hz, 1.5 kHz, 3 kHz

Treble

High shelf +-13dB @ 5 kHz

Dimensions

Width: 125 mm / 5″
Length: 96 mm/ 3¾″
Height: 57 mm / 2¼″
Weight: 430 g / 0.95 lb

Warning

When the pedal is on bypass the master volume does not affect the headphone volume. In this case the total volume is adjustable in Darkglass Suite. With sensitive headphones, the bypass volume can be very loud if not adjusted.

The Luminal Booster Ultra has a current draw of 400mA. Only use a regulated 9V DC adapter with a center-negative plug.

Unregulated power supplies and/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty.

Input & Outputs

Input

Connect your instrument or output from your pedal board to the ¼” mono jack.

Aux In

This 3.5mm stereo input allows you to practice with backing tracks from e.g. your smartphone or laptop. Auxiliary input can only be used with the headphone output.

The pedal does not control the level, it must be set from your audio source. Remember to always first set the level low before connecting anything to the aux in!.

Headphone Output

Luminal Booster Ultra has an internal stereo headphone amplifier capable of driving a minimum load of 16 ohms from the 3.5mm stereo jack. Use the Master volume control to adjust the level.

9V DC

Only use a regulated 9V DC adapter with a center-negative plug

Output

Connect from the ¼” Output jack to the input of your amplifier or another effects pedal.

Direct Output

Balanced XLR output for connecting the pedal to a microphone preamp, PA system etc.

Ground lift

Disconnects the signal ground on the Direct Output to break any ground loops. Set this switch to either position that has less noise. The switch does not affect the ¼” output.

Cab Sim

Select between 7 Cab Sim slots for the XLR can be accessed by pushing on the Character knob.

USB

A USB C connector allows you to connect the pedal to PC/Mac to load cabinet simulation impulse responses to the pedal and control various other settings.

We ship via Fedex ground, UPS, or USPS and insurance is always included in shipping.

Sales tax will be collected for all New York residents. Due to new laws in effect, other states are now collecting tax as well. Please note that this is out of our hands. If your state collects sales tax, it will be added to the sale total.  

 Payments must be made within 48 hours of Sale/Auction’s end.

Feel free to send a message if you have any questions. We are a full service music store in the Long Island, NY Area.

                                             GOOD LUCK AND HAPPY BUYING!!!